BB1 Centrifugal Pump for High Pressure Process Service
At Fonda Pumps, we produce a BB1 centrifugal pump for high pressure process and water applications. The BB1 series DSH pump is a horizontal split case centrifugal pump. It is available as a single-stage or two-stage model, with a double volute design and high efficiency hydraulic profile. The pump is a heavy-duty process pump in our industrial line and is intended for applications such as fire services, cooling towers, municipal water, oil processing, petrochemical, sugar, paper, pipeline and power plants.
A BB1 Centrifugal Pump for High Pressure Service
The BB1 pump is a between-bearing, horizontal split case design. The casing can be opened without removing the piping, which makes maintenance easier. The two-stage model is used for higher pressure duties. The pump should be selected for the flow, the head, the temperature and the fluid. The buyer should provide the duty point and the system curve so that the hydraulic selection can be confirmed.
The DSH pump is described as a heavy-duty process pump with a double volute. The double volute helps balance the radial load and reduce shaft deflection. The high efficiency hydraulic design is intended to reduce power consumption at the duty point. The buyer should confirm the impeller diameter, the speed and the material before the order. A performance curve should be provided for the selected model.
Applications and Installation
The BB1 pump is used in fire services, cooling towers, municipal water supply, oil and gas, petrochemical, sugar, paper, pipeline and power generation. The pump can be installed in a horizontal position with the suction and discharge piping arranged according to the system design. The foundation should be rigid, and the pump and motor should be aligned after installation.
The suction piping should be short and free from air pockets. The discharge piping should include a check valve and an isolation valve as required. The pump should be primed before startup and should not run dry. The mechanical seal and the bearings should be checked during commissioning. These are general installation points; the final procedure should follow the pump manual and the project specification.
Materials and API 610
The BB1 pump is part of our API 610 standard centrifugal pump range. The buyer should confirm the API 610 edition and the material class for the application. The wetted parts, the shaft, the bearings and the seal should be selected for the fluid and the operating conditions. A material certificate and a test report should be available for the order.

For corrosive or high-temperature service, the material selection is critical. The buyer should provide the fluid composition, the temperature and the concentration. The pump supplier should confirm the material compatibility and the seal plan. A review of the datasheet and the piping layout before the order helps avoid a mismatch at the site.
Performance and Testing
The pump should be tested for performance, head, flow and power at the specified duty point. A hydrostatic test and a mechanical run test should be carried out according to the standard. The buyer should confirm the test standard and the acceptance criteria. The test report should include the curve, the vibration and the noise data where required.
After installation, the pump should be commissioned with the correct alignment and the correct rotation. The operator should check the suction pressure, the discharge pressure, the current and the vibration. A preventive maintenance plan should cover the bearings, the seal, the coupling and the alignment. A spare parts list helps the plant prepare for maintenance.
Choosing a Centrifugal Pump Supplier
When comparing suppliers, look at the hydraulic selection, the material, the API 610 compliance, the test report and the after-sales support. Ask for a performance curve and a reference in a similar duty. A supplier with a full API 610 range can help with OH, BB and VS pumps. The lowest price is less useful if the pump does not meet the duty point or the material requirement.
Fonda Pumps can review the product details with you and confirm the available configuration. To request a quotation, a performance curve or the current product list, contact us at overseas@fondapumps.com or +86 24 89362253 ext:826. Our team will confirm the next steps for your project.
A BB1 centrifugal pump should be selected for the flow, the head, the fluid and the API 610 requirement. The BB1 series DSH pump from Fonda Pumps offers a horizontal split case design, two-stage configuration and high efficiency hydraulics. Please share your duty point so that we can confirm the right pump and support your next project.
Previous
More information
Tel:+86 24 89362253 ext:826
Fax: +86 24 89362260
Cell:+86 15002487166
Contact: David Lin (Overseas Business Manager)
Email:overseas@fondapumps.com
david@fondapumps.com
Address: No.171-5, Honghui Road, Yuhong District, Shenyang, China